Monday, June 4, 2012

Armored Cruiser, railings and rivets

     My earlier efforts at creating embossed rivets having failed I tried the idea put forward by a commenter on TMP and used fabric paint. At first I was not hopeful that this would lead to success as my first efforts were, well, let us say uneven. Practice makes perfect they say, and as I got the hang of things the results improved markedly; then I had a thought. Why put the rivets directly onto the model when I could create strips of rivets that could be applied all at once. The results you see below;

the yellow was my choice, the pink was my granddaughter's

even spacing was achieved by using a spare 3x5 card for a guide

then I cut along the lines

I applied a rivet panel over all the joints in the structure

while doing so I was reminded of the horrible candy we got as kids,
 appropriately named "Dots" it consisted of brightly colored sugar dots on paper strips

the crane is very "rivety"

as is the turret

it doesn't come through very well in the picture but the pink shows through the yellow paint

I attached the strips the same way I attached the card earlier;
50/50 glue and water mix, brushed on before the strip is applied
and then another coat over the top of the strip after it has been positioned

be liberal with the glue, this photo also shows the folly of
setting the railing before getting basic hull details finished

I used the tip of the brush to nudge the strips into place

finally ready for paint, I chose to go with the black hull/yellow superstructure

the new crew inspects the ship

the stanchions were painted yellow, I still am not sure if that is the way I want to go,
 black would be more striking so the jury is still out on that detail

the Captain is still waiting for the ship's wheel and assorted other bridge stuff,
I only just ordered that stuff today, so it will be a while

I haven't made up my mind on what color to paint the gun barrels either

stepping back and looking at it I realized that the yellow is REALLY yellow

the steam launch

another view, the smokestack is a .22cal magnum case and the boiler is a .38 special case

the captain tries out the steam launch

while the sailors head out on liberty

     Well, there she is, nearly finished. I still am not happy about the arrangement of smokestacks, cranes and boats on the superstructure. I might just build some smaller boats to free up some space for searchlights and/or light guns. Another facet is just how to paint the railings, I might just try one side one way and the other side the different way and see which I like best. When I build another one the railings are certainly going on last!

6 comments:

  1. Very very nice work, Sir. Congratulations on conquering the rivet dilemma. Really great scratchbuild.

    ReplyDelete
  2. A good quick build, considering the scale of the project!

    ReplyDelete
  3. I can't believe how quickly you built this beast. Great job and can't wait to see her finished.

    ReplyDelete
  4. Nicely done and quickly too.

    ReplyDelete
  5. You need some port holes to break up the featureless parts of the superstructure. That will help things.

    ReplyDelete
  6. They are on order along with the bridge stuff, I was thinking of using grommets but couldn't find them in the right size so I ordered them from tin-soldier.com

    ReplyDelete