Sunday, July 31, 2011

Building the 1/100 Zvezda SdKfz 251

    Looking for something quick to build before the Saturday game my eye lighted on the Zvezda kit of the Hanomag sitting on my workbench's "in" pile (which, by the way, is a pretty big pile). I thought to myself, "Ah, that would be fast". Well I wasn't wrong. As has become the trademark of Zvezda kits this one is a sharp bit of work. I did encounter one problem and one oversight. The problem I will explain in the building pictures, the oversight (and I can't think of how I missed it in the sprue shots earlier) is that the top-mounted mg is not present in the kit and the shield is also gone missing, an AA mg is provided but it should be mounted at the rear of the vehicle, not the front. An odd oversight for a company that put lug-nuts on the wheels of it's models. But on to the build;

the chassis and track units 

these went together very tightly

     After adding the wheels I tried to attach the fenders to the lower hull. This is where I encountered the problem. Perhaps it is just me, but try as I might I could not get the parts to fit together. Always having been one for the most direct approach I cut away the portion of the offending part that was causing the trouble (see illustration below) and things went smoothly.

two quick cuts solved the problem

     Once the lower hull and fenders were joined the top hull dropped into place and was ready to be joined to the chassis assembly.

all parts fit snugly enough to not need gluing

     The chassis and hull went together without a hitch and I added the MG to the model for the "as designed" look, I will get some plastic card and fabricate a gunshield for the MG later. The weird part is that the box-art shows it properly while the model is wrong.

Highly recommended,   John

3 comments:

  1. John,
    I believe that the earlier versions of the 251 lacked the gun shield. There are images of these vehicles with sandbags piled up around the front mg as an impromptue form of 'shield'. I'd also be wary of the box art as it looks to have been recycled from the 1/72 and 1/35 scale versions of the same kits. The Katyusha is a prime example!

    ReplyDelete
  2. Anynomous is correct. Looks like a model 'A' as the rear view ports on the body side were eliminated with the 'B' model. They were retrofitted with gun shields for the foreward mg with the introduction of the 'B' model. (one source says 'C' model. 'C' model production began in 1940. A few of these may have been in Poland. 1st Panzer had a company in 1939 and a battalion in 1940 (1st Schutzen Rgt) while 2nd and 3rd Rgt had only a company (in 2nd Pz and 3rd Pz Div, respectively. None of the other 7 Panzer Div had armored Schutzen companies. And 251 A and B production ended in 1940. Mike Reese

    ReplyDelete
  3. Thanks, this helped me out I just cut off the bottom fixing point as opposed to the whole section you highlighted..

    ReplyDelete